How to remove the shadow of the keyboard protection screen in the notebook screen?. With the lid on, after a night, there was a watermark, which was of poor quality
The fan stops rotating, causing the inside of the notebook to heat up, slowly forming water vapor. Second days later it will have watermarks!
In general, the keyboard does not touch the screen (the laptop B bezel is surrounded by cushioning and anti compression pads). This may be due to the fact that the keyboard protection you purchased is thicker than the gap between the foot pad and the screen, so the screen is compressed and the watermark is left for a long time. (this actually work with some laptop related work has lower notebook, in the mold design on the existence of such defects, the screen is almost no gap between the surface of the keyboard and display more will form a slight squeeze, long-term use is likely to cause this phenomenon.Suggest that you pay attention to watch your laptop B (screen surface) around the foot pad, to see if the thickness is enough. In addition to remove watermark by alcohol and a soft brush on the screen printed water cleaning (note must be light, turn off the power, try to make the screen tends to level, prevent the liquid flowing inside through the frame around the screen), you can also try to screen film!I hope I can help you. Good luck!
Can be washed with alcohol, we do mobile phone screen, the screen is dirty with alcohol wipe, afraid of, dilute it, can also be replaced by wine, nothing, do not get too much on the line! Otherwise, it's not good to get in from the side!
! It is recommended to remove the keyboard protection film, and now the keyboard is waterproof, afraid of dirty words, after a period of time to use alcohol to wash, you can, or every time after shutdown, and then close the notebook lid!
Not bad quality, when you are playing, the computer will heat up, and your keyboard covered with protective film, the heat under the keyboard, and then shut the lid immediately after the shutdown,
