How to replace the warm and cold faucet of the kitchen sink
Very fun, but hope to be able to pull the song as much as possible
Hello there! First of all to close the water pipe of the total valve, and then you can replace the bad valve. Very simple, but have the tools to disassemble the valve. Thank you.
Replacement method: 1, to prepare a word or a Phillips screwdriver, or alligator wrench, this should be based on their own home faucet screws to choose. And then prepare a sharp nose pliers, and a knife. 2, first to find the faucet of the water switch, replace the spool before. And then turn off, so as not to replace the water when the replacement. And then find the cold water button or plastic cap, with a small blade to gently pry it down, so you can see the inside of the screw. 3, look at what the shape of the screw or cross the word, open the hot and cold water button. Or hexagonal screws, and then decide which screwdriver, or hex wrench. Remove the screw in the hole with a screwdriver and then remove the handle of the faucet. 4, some spool outside there is a layer of fixed shell cover, remove the handle will be able to see the inside of the spool. The lid can be removed and then you can see the fixed spool card pieces, card pieces generally have four claws, with both sides of the needle nose pliers to catch the two claws, and then clockwise rotation can remove the card Pieces. 5, you can remove the bad spool and then install the new spool, the card after unloading. Will be in front of the method in turn to operate, the other components to re-install back, the faucet handle on the post, punch water valve, try to leak, no problem will lock the handle, installed hot and cold water plastic cap can be.
