Home network is Netcom, want to install a wireless router in set-top boxes, it took half a day on the router face, but can not jump out of Netcom's login page, do not know how it happened, trouble you to solve, thank you ~!
Network cable in accordance with the instructions on the following, the computer opens the browser, enter 192.168.1.1 or 192.168.0.1, account password is admin, so that you can enter the routing settings interface.
Set your computer network card to automatic access, and then check the network parameters obtained, through the gateway IP to log on the router
Two, then start setting up the TV to connect to the wireless network.1, the required conditions: TV, networked wireless router;2. Start the TV set and use the remote control to enter the interface of the TV set;3, in the system settings interface, choose to enter the left "network settings", and then select the right "WIFI" direct connection";4, select the WiFi directly connected, you can see the nearby WiFi signal, select the user's WiFi signal, click the enter password, you can connect;5, after the connection is successful, the router will automatically assign the IP address to the TV set. After the TV set gets the IP address, it means that the TV has been successfully connected to the wireless network.6, at this time, users can exit settings, return to the TV network TV interface, you can choose and watch network TV programs.
A wireless router is provided with a method for connecting a smart television set as follows:First, connect computers and routers, and set up routers to connect to broadband networks;1, according to the cat, routers and computer connected to broadband cable modem and router connection; the WAN port, the router receives the network signals; and then cable connected to the router's LAN port and computer network port, the computer network router receives a transmission signal.2, the power up the cat, routers, computer; open the browser on the computer, enter the router (such as TPLink) the site "191.168.1.1", in the pop-up dialog box, enter the user name and password "admin", "set to log in the router interface ok.3, in the router settings interface, point to the left side of the network parameters WAN port settings, enter the user's network of broadband accounts and passwords, and then click save, router can successfully connect to broadband networks.4, and then set up the router's wireless network user name and password, point to the left of the wireless settings, enter the wireless network name and corresponding password, click save, you can complete the wireless signal settings.5, after the completion of the router settings, exit the router settings, restart the router. At this point, the computer can connect to the router, access to the Internet, you can literally open the web, Internet testing.
