How to solve the looseness of pump bearing seat and bearing sleeve? Please be specific. Thank you
Plus anaerobic lock, try. First remove the oil from the surface.
1. Change the slightly larger bearings.2, in the bearing coat lining to write the back of the red copper skin, and then knock in. As the degree of loosening the thick thin copper lining decided, if you do not need full circle lining lining can keep several points, several points are symmetrical.3, with 2 or more steel pad at the seam, and then knock bearing, so that steel wire forming pin. Attention symmetry.4, into the bearing, with the sample punch in the shaft seat close to the location of the shaft, symmetrical knock a few points, so that a little deformation of the axle seat, squeeze the bearings.
