First, use the wet tissue to wipe the mobile phone, and then use the non-woven fabrics or glasses cloth to clean up (preferably in the light). After clean up, tear off the screen film, and align at the hole position, begin to paste from the side, and then slowly paste from the top to the bottom and gently press it to avoid the bubbles.
The step 1 of sticking the mobile phone film: First, use the fibre cloth in the package to clean up the dust on the surface of the screen, you should wipe it in order, but do not wipe back and forth; notice: You must first clear off the small cloth or wool cloth of the small fiber cloth, and then to wipe. Step 2: Generally, there is three layers of screen film, you should select the appropriate size, and tear off the "release liner" at the bottom layer, (the middle layer is actually useful), and then align at the LCD screen and carefully paste it down. Step 3: Stick the film and press it to purge the air under the plate, it is better to use the special tools. Step 4: You should carefully remove the air, so as not to leave the bubble and effect the beauty. Step 5: After it is pasted, you can tear off the "protective?film" at the top layer. Step 6: After the protective film is pasted, it can be used. Prompt： The light?transmittance is the most important evaluation index of the mobile phone screen protective film, when selecting the material, we must choose the regular film with good quality.
The tools / raw material: the film, cleanser, wiping paper, brush and card. method / steps: first, you should buy a film that is suitable to your mobile phone models, you do not buy the wrong types. You can buy it online, or buy it at the mobile phone accessories. the skills of sticking the film: you should select a closed space and clean desktop, there is no dust in the air. you should first use the brush (or writting brush) to sweep out the dust on the surface of mobile phone. And then spray the cleanser on the screen, and use the wiping?cloth to clean out the surface of mobile phone. the skills of sticking the film: first, you should make a comparison between the film and the phone, and then tear off the No.1 film. Stick a side of the back of the film on the screen, and use your hand to press the edge and tear off the back of No.1 film, and the use the card to push the film to make it stick on the screen. And tear off the front of No.2 film, there will be some bubbles, you don't worry. You can use the card to squeeze out the bubbles. And the check the corners and edges to determine whether it is suitable, so the entire process is completed.
