Question:

How to use a hammer

How to use a hammer

Answer:

First of all, to carefully check the 26 hammer there is no damage before use. Such as: whether the shell, handle cracks, broken; wires, plugs and so on are in good condition; switch open is normal, and so on. These are the basis for the safe use of 26 electric hammer.Secondly, some improper operations should be avoided in use. In some places the use of the II class 26 hand-held electric hammer, to ensure that the electric current is less than 15mA, the leakage protector and the installation of the rated action time is less than 0.1s. If the selection of the I class 26 hand-held electric hammer, must be zero connection protection, operator wear insulation protection tool. This kind of hammer, avoid in damp or metal frame where practical, easily lead to electric shock events.Third, when the 26 hammer electric operation, let it idle for a period of time, observe whether it is flexible without hindrance. When in use, the external force applied to the 26 hammer should be smooth, not too hard, and do not touch the mold and the wheel. When the heating or violent sound occurs during the operation, the machine should be checked and stopped immediately and must not be overloaded.
Drilling operation(1) pull the work knob to the "drilling" (not hammer) position.(2) place the drill in the hole where it is to be drilled and then pull the trigger switch. You can jog.
Chisel, flat and crush work(1) will work the way to "pull knob thump" position.(2) do the work by using the weight of the rig, and don't press hard
Drilling with impact drilling(1) pull the work knob to the position of the impact rotor.(2) put the drill into the drill hole, then pull the switch. The hammer is only slightly pushed, so that the chip can be freely discharged without pushing hard.

Share to: