How to use ceramic tile adhesive?
Method for using ceramic tile adhesive:The ceramic tile adhesive reduces the dependence of the traditional construction process on the process of sprinkling and soaking bricks at the grass-roots level, and avoids the problem of insufficient sprinkling caused by the immersion bricks.1, a packet of materials according to the designated mixing ratio of mixing, stirring until the uniform without caking, let the slurry stand for 3 to 5 minutes, and then stir once, you can use.2, select the appropriate gear scraper to ensure that the effective paste area is at least 65% of the tile area.3, with the special tooth type blade with mortar 3 to 5 mm thick base group (i.e. sand on the ceramic tile paste, and then use a blade thickness) on one side of the straight tooth shape or S shape pull stripe, scraper plane and the base plane intersection is 45 degrees to 60 degrees. Tiles need not be soaked,4. Just stick to the wall / floor according to the order and then press it down. And adjust the tile position within the specified time. Wet cement can be removed with water, but cured only by mechanical means.
The water into a mixing vessel, adding powder with an electric blender mix, the proportion of packaging according to the above description, with toothed trowel mortar will scratch to the grassroots, carding is strip, clean up the dust on the surface of ceramic tile, ceramic tile can be directly pasted. Here the grassroots flatness, if not required by or leveling the thick paste method.
The water into a mixing vessel, adding powder with an electric blender mix, the proportion of packaging according to the above description, with toothed trowel mortar will scratch to the grassroots, carding is strip, clean up the dust on the surface of ceramic tile, ceramic tile can be directly pasted.
