In order to maintain the appearance of locks and extend the life of the lock, in the daily use of the process, should pay attention to its maintenance and maintenance. 1. Always keep the lock body transmission parts of the lubricant, in order to maintain its smooth transmission and extend the service life. It is recommended to check once a year or a year, and check whether the fastening screws are loose to ensure fastening. 2. How to lock the lock during use? In order to maintain the appearance of locks and extend the life of the lock, in the daily use of the process, should pay attention to its maintenance and maintenance. 1. Always keep the lock body transmission parts of the lubricant, in order to maintain its smooth transmission and extend the service life. It is recommended to check once a year or a year, and check whether the fastening screws are loose to ensure fastening. 2. Lock in the course of the use of regular (half a year or a year) or in the key plug is not smooth, you can put in the lock cylinder slotted small graphite powder or pencil powder to ensure that the key plug smooth. But should not join any other oil for lubrication, in order to avoid grease stick spring spring, resulting in the lock can not turn and can not open. 3. Check the lock body and the lock plate with the gap, the gap between the latch and the lock plate hole is appropriate, the door and the door frame with the best gap of 1.5mm-2.5mm. If there is a change, you should adjust the position of the door hinge or lock plate. At the same time pay attention to the weather (spring wet, dry in winter) caused by the cold shrinkage to ensure that the door and door frame, lock body and lock plate clearance with reasonable to ensure the use of smooth locks. , The specific can be bought directly when asked the manufacturers of people.
Do not always rust the door lock, smooth switch.
Escala and other well-known lock factory well-known lock factory mostly use tiger hotolube or Krupp kluber all synthetic lock lubricants. All synthetic base oil production, clear and transparent, colorless and tasteless, low temperature, not dust. Pot full of 30 ml tip small oil bottle, drop a few drops can be easy to use.
Can not use mineral oil, because the mineral oil viscosity is highly polluted. It is not appropriate to use pencil or black graphite lubrication, can not be lubricated to the internal parts, and there will be heavy metal and color pollution.
Performance maintenance 1, in the course of the use of regular (six months or once a year) or in the key plug is not smooth, add some graphite powder in the keyhole (pencil powder) from the lubrication, do not add any liquid oil Material as a lubricant to avoid grease sticks marbles spring, resulting in the lock can not turn and can not open. When the door is closed more laborious, can be wiped in the oblique tongue pencil can be resolved. 2, closing the best holding the handle, the lock into the lock body, close the door and then let go, do not force hit the door, otherwise it will reduce the life of the lock. 3, when the main lock or insurance lock out of the door, do not violent impact, so as not to damage the tongue and the door frame. 4, because the door and the door frame between the installed seal has a stretch effect, so when the lock with a handle or key lock, you can open the door at the same time by hand to push the door or sliding door to overcome the elasticity, do not force the handle or key Open the door to prevent the handle or key from breaking.
Appearance Maintenance: 1. During the renovation of the house, please use the plastic bag (do not bring the plastic tape with the plastic surface and the lock surface contact) to seal the lock handle, panel and other exposed parts, so as not to lock the surface treatment layer Decorative with acidic or alkaline materials and gas erosion caused by spots, blistering or even delamination phenomenon, seriously affect the appearance of the quality of the lock. Some zinc alloy and copper locks, installed on the door for a long time will find a "spot", this phenomenon does not belong to rust, but belongs to oxidation, if this happens, as long as the surface wax spray You can remove the spots. 2, the normal use, if dirt, dry cloth can be used to clear, do not use detergent and other chemicals scrub. Otherwise, will destroy the protective film of the exposed parts, causing fading. Do not use a damp cloth to wipe the lock body and handle, because some metal material locks will be rusty; alloy material lock will wear off the coating, loss of beautiful results.
