How to use the ordinary electric drill in drilling the tile hanging things?

Answer:

An ordinary drill can, but must use an open bore with an alloy head (sold in a hardware store). First break to the center of the enamel drilling tools, crack a little on the line, convenient to locate drill drilling, without slipping on the tile, 6mm more than a dozen holes do not in place, leaving a little margin, according to the required aperture and then drill a hole will not be broken.

Ordinary drill ~ more difficult, oh, to use a speed adjustable "impact drilling", you can rarely smash tiles. When you start drilling, you'll hit it at a very slow rate, and you'll be able to hit it at full speed after drilling through the tiles.

B, empty plastic bottles filled with water, drill a small hole in the bottle lid, cover the backupC, turn on the power, pinpoint the location, one person drilling, and the other with a ready water bottle, add water, usually can quickly wear.

1, need tools: ordinary flashlight drill, glass drill (according to the aperture in the hardware store to buy), with plastic, empty mineral water or beverage bottle2, concrete operation method: A, install glass drill bit, the method is same as common drill bit, insert - lock