How to wrap the pipe with aluminum buckle?
Do not know you are the owner or the worker? Packaged pipes need to be as small as possible with tiles. First to close the edge with glue to the wall, and then buckle board, and finally in the middle of the two sides of the board can be attached to the sun angle. If the pipe is thick enough, the diameter exceeds the width of the board you use, you need to cut the triangular keel in the middle of the two plates of this plane.
Construction process:
Install the plastic gusset: add the sun on the wood keel, directly from the bottom of the buckle up into the installation, the method is simple, but not beautiful appearance, and the surrounding wall is not very match.
Installation of aluminum-plastic plate: in the wooden keel on the nail nine PCT board, and then glue the aluminum-plastic plate stick to it. There are many colors of aluminum-plastic plate, decorated close to the effect of the disk, but the aluminum-plastic plate angle is easy to crack, so to use thicker plate.
Clamp method refers to the use of hanging pendant plate directly produced frame wrapped pipe method. It does not need to fill the disk, making very convenient. More suitable for home decoration is completed, want to wrap up the case.
