Home > categories > Minerals & Metallurgy > Aluminum Foils > I know this has most likely been asked but while I having my coffee in preparation to cook?
Question:

I know this has most likely been asked but while I having my coffee in preparation to cook?

What side of the aluminum foil be out? Shiny? Matte?

Answer:

contact alcoa aluminum get some of the rods that can be melted with a Mapp torch there around $125 a for 2 lb or check at a welding supply
Both Lincoln and Miller make a 110 mig welder with a spool gun optionThese are light industrial machines you'll get at a welding supply not at Walmart or LowesThe machine will set you back about $800.
This is the answer that Reynolds Wrap givesReynolds Wrap? Aluminum Foil Frequently Asked Questions Which side of Reynolds Wrap? Aluminum Foil should I use, the shiny or the dull side? Actually, it makes no difference which side of the aluminum foil you use—both sides do the same fine job of cooking, freezing and storing foodThe difference in appearance between dull and shiny is due to the foil manufacturing processIn the final rolling step, two layers of foil are passed through the rolling mill at the same timeThe side coming in contact with the mill's highly polished steel rollers becomes shinyThe other side, not coming in contact with the heavy rollers, comes out with a dull or matte finishThe exception is when using Reynolds Wrap? Release? Non-Stick Aluminum FoilThe non-stick coating is applied during manufacturing to the dull side of the foilAlways place the non-stick (dull) side toward the food.
i use my 110 volt MIG with argon gasit is much cheaper than a TIG welderi bought my MIG for $250US dollars.

Share to: