i need a cheep way to clean my silver plates anyone know of a way?
Put a big piece of aluminum foil in a dish pan or the kitchen sinkSprinkle about a cup of baking soda on top, then fill with hot HOT waterPut your silver in to soak about 10 minutes-each piece must touch aluminum foil while soakingRinse pieces with cool waterWipe silver with soft clothIf not enough tarnish has been removed, you can repeat, or use white toothpasteRub it on, then rub it offrinse thoroughly, and dry with a soft clothGood Luck!
Yes you can do that but OSB board or particle board is cheaper than plywoodThe hard question- is there a large enough opening to get sheets up there? If not cut it in smaller pcs.
if the joists are all about14 or so apart and you will be mostly crawling around you can use 1/2 plywood the grain .if access is tight you may have to cut the boards into stripsi would start in the center closest to the access and work myself out from there.you can leave gaps near the roof lineprobably just use nails dont even need to many just enough so the boards dont move around.watch for wires.the strips of ply wood need to lay across the joists
