im hooking a amp up and i need to run my remote wire to my ignition wire
I have wired up alot of amps and the remote wire on the amp should be connected to the power antenna/amp turn on wire on the stereo head unit. This allows the amp to only turn on when the stereo is on. If you are connecting an amp to a factory stereo,I see why you would need to find an ignition wire. You need to probe the fuse panel with a 12 volt test light to find a circuit that only comes on with the key. Usually there is a spare accessory fuse location just for this. Buy a fuse tap or specialty fuse from a auto parts store to connect your remote wire to. There is very little current draw to turn on the amp,so almost any circuit on the fuse panel will work if it is only on with the key.
