if the air compressor to the dryer, and then to the gas tank, what will the impact?
The air compressor inlet tank air pressure pulse wave, and higher temperature due to the presence of oil mist and water vapor, a larger proportion of the molecular sieve dryer is a tremendous burden, through the gas tank, compressed air will cool down a part of water vapor condensation, and pressure because of the buffer becomes relatively smooth to prolong the life of the dryer is good. The most important point is that relative to the storage tank to the precision dryer, maintenance probability is big, in the gas tank behind the gas tank valve off, let go of the pressure in the system is good, in front, do you want to light the gas tank of compressed air!
Freeze dryers have little effect on water and gas consumption. If it is an adsorption dryer, there will be some effect on the action of the desiccant. Suction machine gas consumption is relatively large, in front of the gas tank will play a role in stabilizing and removing a small part of water.
The gas tank can remove some oil, impurities and cooling before
In principle, it is recommended to be installed at the back of the gas tank, because the gas tank can discharge a certain amount of condensed water, which can reduce the working load of the cold drier or suction machine and achieve better drying effect.For example, air compressor and cold dry machine again, if the cold and dry machine in the gas tank back, after drying the dew point temperature can reach 10 DEG C, if placed in front of the gas tank, then drying the dew point temperature of only 15 degrees Celsius, the drying effect is much reduced. If it is a suction machine, it will also reduce the life of adsorption material.In order to improve the efficiency of the cold and dry machine, generally before the dryer installed steam separator, can achieve better results.At the same time, the gas tank can also achieve a buffer effect.
In principle, it is recommended to be installed at the back of the gas tank, because the gas tank can discharge a certain amount of condensed water, which can reduce the working load of the cold drier or suction machine and achieve better drying effect.For example: air compressor and cold dry machine again, if the cold and dry machine in the gas tank back, after drying the dew point temperature can reach 10 DEG C, if placed in front of the gas tank, then drying the dew point temperature of only 15 degrees Celsius, the drying effect is much reduced. If it is a suction machine, it will also reduce the life of adsorption material.In order to improve the efficiency of the cold and dry machine, generally installed before the dryer separator can achieve better results, while the gas tank can also achieve a buffer role.
