Ice machine has been in the state of ice, until downtime, how to solve?
The solution is as follows:Draw on a temperature control, a relay, 2 timers can basically get, but the timer timer range from 30 seconds to 40 minutes range. A timer is the time limit for ice retreat, which should be adjusted for 30 seconds, the other to 40 minutes adjustable, and temperature control, and to prevent temperature control when forced to retreat
Iron and stainless steel probe no never mind, several key positions, there is only one problem: the magnet switch problem, ice fell to the baffle, the baffle on the edge of the magnet switch and leave the magnet close to the magnet switch or closed and the computer board as to enter the next cycle. Long time can not detect switch action, computer board will stop, protect, reopen and make again. Some because of high voltage switch action lead to stop.
The reasons are as follows:This is a problem with the magnet switch. When the ice drops, it hits the baffle. The magnet on the edge of the baffle board leaves the magnet switch which is close to it. The magnet switch is broken or closed, and the computer board enters the next cycle on the basis of this. Long time can not detect switch action, computer board will stop, protect, reopen and make again. Some because of high voltage switch action lead to stop.
