If the welding rod does not release in time, will the electric clamp affect the welding machine?
The welding rod will affect the welding machine.Welding rod and workpiece adhesion, welding machine is in short circuit state. Short time no influence (not more than 1 second, in fact, the electrode stroke, arc or direct arc welding on the electrode adhesion, the workpiece exactly the same, but the arc time is short). Long time sticky electrode will burn welder.Electrode welding current is too small, basic welding rod arc improper welding stick phenomenon occurs. Need to hold the welding clamp handle promptly with the thumb, rod and gun detachment. To burn the welding machine or cause more accidents.
The electrode and the weldment are in contact with each other and will burn in the absence of arcing, which is equivalent to the two side short circuit and the current is infinite.When the coil is insulated and aging, the rated voltage is too large, the electric welder will be burnt out!Under normal circumstances, the two side burned out, overload, that is, his output power is greater than his rated power!
Sticky electrode has influence on welding machine. Possibility of burnout of welding machine.In the welding process of hand welding, the welding electrode and the workpiece are stuck together, and the welding machine is always short circuited.Because the short-circuit current is big, the long time short circuit will burn out the welding machine.The viscosity in electrode, press the holder shall promptly thumb pressing handle, rod and gun detachment.
