Home > categories > Construction & Real Estate > Wood Flooring > In wood floors above a layer of the floor to the original floor removed a few do
Question:

In wood floors above a layer of the floor to the original floor removed a few do

Some people say that the following floor is damp, there are above the floor below the film cover, gas out, will make the floor below the drum, which led to the floor above the drum, this statement is not it? My home is not a floor, the floor will get damp? Will there be any problem? Please experienced friend told me, what should I do. Sincere thanks!

Answer:

Finally, if you are going to shop more than the value of the wooden floor of the previous solid wood flooring, it is recommended that you take off the floor, replaced keel, re laying. In order to extend the useful life of the floor.Now there are solid wood lock floor, the use of the balance of wet and dry technology, locking links, the floor and the floor between the closely linked, the release of wood stress. Can also be used in the ground heating environment.
I recommend:1, solid wood floor removed, check the moisture content of the keel, if less than 18%, and there is no decay deformation, you can continue to use keel.2, if you are going to shop floor is solid wood flooring, then take the original floor down, will be the original keel shop up.3, if you are going to the floor is not solid wood flooring, it is recommended in the keel above Overlay "gross floor" (that is, multilayer board, 9 PCT board), "gross floor" fixed keel with a nail, and then add the moistureproof film in the hair on the floor after the shop to shop you now the floor.
Unwanted。Prior to the solid wood floor keel generally leveling, then the surface of the solid wood floor has been very flat, and directly paved the whole good, there is no sound.But you'd better check the degree of decay. There is a lot of noise on the floor.If you want to shop floor stability, direct shop in the original solid wood floor is not the best choice

Share to: