Home > categories > Construction & Real Estate > Automatic Doors > Induction automatic door modification access control?
Question:

Induction automatic door modification access control?

I now have to have a fitted sensor glass door converted into access control, that is, Monday to Friday also use infrared sensor access, Saturday and Sunday replaced with a credit card access in the access, infrared sensor can not enter.

Answer:

The access control controller usually has two sets of relays, one with auxiliary relay. It also has a NC NO COM terminal that is usually not used. You can connect the infrared to the auxiliary relay NC and the COM terminal together with the access controller main relay and to the sensor door control Device signal input, through the access control soft parts set relay auxiliary infrared week to Friday work, access control Saturday and Sunday work, so that they are to the specified time to work without interfering with each other.
This is very simple, in the software set up on it, but to choose a professional access controller can be, Qingdao Jiashun professional access control
This easy, automatic glass door is generally in the role of infrared probe, give it a normally closed signal, so that the door open! You can be the sensor signal and credit card signal at the same time the door open! The You will be to achieve this card authorization, I set the card through the access control software Monday to Friday is often open, then access control accessory lock (when the door is often open, with a topical table which is normally closed, This normally closed is not necessarily the above instructions that normally closed) normally closed and the probe signal connected in series after the automatic door sensor terminal!

Share to: