Installation, adjustment and operation of SX type sand washing machine?
After the installation and adjustment of the machine, the test run shall be carried out and the no-load test shall be carried out:1) continuous operation for 2 hours:2) all solid parts should be firm and free of looseness;3) reducer and gear box are all normal sound.5. the load test shall meet the following requirements in addition to the no-load test run requirements:1) when feeding, the material can not be strongly impact the tank, not allowed to load, feed and fill the tank, so as not to damage the bucket and airframe. 2) to the maximum size of the material to meet the design requirements.
After installation, check the reducer size, gear shift, the water tank and the big wheel gap is the same, after the adjustment, the machine fixed welding on the basis.
Due to the large torque according to, so the author suggests that the machine is installed on a concrete foundation, on the basis of an embedded welding welding for the installation of foundation, depth and area according to the soil conditions calculated separately, proposed basis weight is roughly 3 times the weight of the machine, the machine installation dimensions refer to the base map.
The installation, adjustment and operation of the machine, the machine assembly by the manufacturer, and after the empty car test, qualified after Taiwan supply, users receive goods should be carefully checked. In order to detect and eliminate the possible problems in transit, the machine is installed,
