The water heater in the house has a water inlet, a water outlet and a nozzle.The water inlet is connected to the water pipe, and the nozzle is connected with the nozzle, but what should the outlet be loaded with? Ask for your help, thank you!
Another outlet is at home with other hot water point connection, such as the kitchen would like to pick up a hot tap, winter dishes, dishes, you can use water pipes, PPR tubes and the likeOf course, if there is no other water then plug plug, the general interface size is 4 points
3, indoor ventilation vents must be installed or installed, if installed outdoors, but also pay attention to avoid rain.After installation, please install the personnel to carry on the related security examination and the operation demonstration, and explains how to use.
2, the electric water heater must be installed in a solid wall, the installation of the best place for easy maintenance and maintenance.3, installation of electric water heater power outlet location, must consider as far as possible from the water heater, preferably in 2 meters above, lest shower shower water contact the power socket, cause electric shock.
The water inlet of the water heater is connected with the tap water pipe, and the water outlet is connected with the hot water pipe.Installation method of electric water heater:1, the installation must check whether the circuit is reliable grounding, but also according to the size of the electric water heater power to select the right socket and power cord.
