RT, you can insert two power supply, a power supply board, another power supply hard drive What is this feasible? Viable words will be a waste of power than a sufficient power? Estimate my bunch of things that need to be close to 400W of power. Thank you! More
Theoretically possible, but only need to have a different power supply for each power interface, and the need for space to install a second chassis power supply, or through the extension of the power from the chassis outside the corresponding interface can be connected. And the two green lines of power and black need and get together. But from the reality, it is not necessary. The reason why to install two power is because the power of the power is not enough, then this time you can buy a power of some of the power, the money spent not much. The other one of the chassis put two power or unsafe, if put into the chassis should be more unsafe, so it is recommended to buy a power enough power on it.
Now 99% of the patch panels are installed in the 19-inch cabinet, the most commonly used is . followed by . again . other specifications almost no use.
The principle is very simple telephone line and network cable is certainly not a public network cable connected to the fiber optic cable, fiber optic cable from the fiber box leads to the switch from the switch to the network cable jumper to the front of the network patch panel interface, and then from Network patch panel on the back of the network cable to the room panel, you look at the back of the network patch panel, you can see a network of 8-core clip in the 8-seater inside (to catch the method because the patch panel brand different is also somewhat different) that eight clips is actually connected to the network interface inside of the front of the patch panel of copper
