I'm going to make a liquid chlorine carburetor. The technical characteristics table is as follows: the tube working pressure MPa under the project.
Pressure vessel is belong to GB150 tube, but should the rules don't return to dish tube, if the coil diameter dn < 150 mm, even if the product is greater than 2.5 MPa - P * V L, is zoned category is not only the inspection, but the coil diameter dn > 150 mm, nine times out of ten classes and inspection.
Only those who meet the following conditions can be drawn, and can be regulated. (1) the working pressure is greater than or equal to 0.1 Mpa (work pressure refers to the pressure vessels working in normal circumstances, the top can reach the highest pressure (pressure)); (no liquid static pressure) (2) diameter (non-circular section refers to its maximum size) is greater than or equal to 0.15 m. And the volume (V) is greater than or equal to 0.025 cubic meters, the product of work pressure and volume is greater than or equal to 2.5 MPa - L (volume, which is the geometric volume of the pressure vessel); (3) the maximum working temperature of the medium for gas, liquefied gases, and medium is above or equal to the liquid at its standard boiling point. You can check it out
Liquid chlorine, chlorine gas liquid can coexist in dangerous goods container, although it is constant pressure, still need to have qualified manufacturer to be able to produce
