Is it necessary to install copper strips on the anti-static floor?
Where antistatic requirements are high, a conductive copper strip can be installed under the bracket to enhance the conductive effect.
Other answersAntistatic floor is also called dissipative electrostatic floor. Is a kind of floor, when it is grounded or connected to any lower potential point, so that the charge can be dissipated, and the resistance is characteristic of 1.0x105-109. The anti electrostatic technology of computer room is one of the parts of computer room safety and protection. The static electricity produced by various reasons is one of the most frequent and the most difficult to eliminate. Static electricity will not only cause random fault, misoperation or error in computer operation, but also lead to breakdown and destruction of some components, such as CMOS, MOS circuit, double stage circuit, etc.. Besides, static electricity also has obvious influence on the external equipment of computer. Display device with cathode ray tube, when it is disturbed by the static electricity, it will cause the image to be confused and blurred. Static electricity will also cause Modem, network card, Fax and other work disorders, the printer line is not smooth and other failures.
Antistatic floor laying requirements(1) the laying of the floor shall be done after the completion of the indoor construction and decoration;(2) floor should be level, clean, dry, no debris, no dust;(3) the cables, electrical appliances, air pipes and air-conditioning systems arranged under the floor shall be completed before the installation of the floor;(4) the base of heavy equipment shall be fixed. The equipment shall be installed on the base, and the base height shall be highly consistent with the upper surface of the floor;(5) 220V/50HZ power supply and water source are provided at the construction site.
