Is it possible to have water pipes leaking without water transfer?
On the home improvement waterway acceptance, under normal circumstances: pressure indicators recommended for 0.6-0.8MPA, test pressure within 30 minutes, the pressure is not more than 0.05MPa, while checking whether there is leakage at each connection.
The demarcation line of the responsibility is based on the water meter. There is a problem between your water meter and your home water. The responsibility lies in your home, whether it is ground or underground. If it is the pipe between the two main valves to your home's main valve between the underground pipe out of question, the responsibility is not in your home. The responsibility may be shared by the water company or the owner.
The water meter does not turn there are Water Leakage possible, because every time a drop of water situation, water meter is not rotating or turning can not see, so if the gate is not open on the Water Leakage, Water Leakage, proof of your home water problems, to solve, or cause losses to you are downstairs. For now, is to find the reason for processing, more information, better advice, to provide free concrete waterproof Water Leakage repair professional and technical advice, from today, tomorrow the leakage, annual maintenance, annual leakage.
The home water mouth all unscrew the valve, and then use the foot sealing material is PTFE with (commonly known as raw materials) plug sealed each outlet, control the total water supply valve closed door switch at the same time (must be closed, otherwise the data is not accurate, such as the total valve water seepage other treatment), finally connect the pressure test the pump pressure test, test must take the pipes in the air pressure water (clean as long as the high water outlet of the water can be placed for a while).
Water meter does not turn, there is the possibility of water leakage, if it is in front of the water meter leakage, water meter will not turn.
