Home > categories > Hydraulic & Pneumatic > Air Pump > Is the vacuum compression bag pump universal? Can my vacuum cleaner smoke?
Question:

Is the vacuum compression bag pump universal? Can my vacuum cleaner smoke?

Is the vacuum compression bag pump universal? Can my vacuum cleaner smoke?

Answer:

There is a need not hand pressure pump compression bag now, you can search on Taobao, special favors or shajfw, you can find.
Of course not, ah, vacuum cleaners can, but can not afford to vacuum ah, the most can be drawn to the naked eye, feeling no gas, can not afford a vacuum
Yes, the air pump for vacuum compression bags is also not specified. That is to say, the principle of high power and small power work the same. Vacuum cleaner can be used, but not blind, the use of time can not be too long, otherwise the vacuum inlet pressure is too small, it will damage the vacuum cleaner motor. The principle of the vacuum cleaner: when the pump rotates, it pushes the air to the exhaust port. As the air is pushed forward, the particle density in front of the fan increases and the air pressure increases accordingly, while the air density behind the fan decreases. The pressure drop behind the air pump is the same as the pressure drop in the straw when you drink the drink. The pressure behind the air pump is lower than the pressure outside the vacuum cleaner, which is the ambient pressure. This creates suction in the vacuum cleaner, which is part of the vacuum. As a result, the air outside the vacuum cleaner automatically enters the vacuum cleaner through the intake portVacuum suction compression bag method for dust collector:1. Put the clothes flat in the bag and flatten out the left and right hands.2, the towel will be sealed smooth, so that the sealing fully bonded without cracks.3. Insert the nozzle of the vacuum cleaner into the net sleeve, then insert the tail into the air pipe until it touches the clothes and draw out the air.4, after reaching the compressed state, first pull out the nozzle of the vacuum cleaner, and then pull out the mesh sleeve.5, and finally with the towel will exhaust pipe smooth bonding.

Share to: