Is toilet waterproof coiled material good?
Ground leveling. If you want to change the bathroom tiles, after the removal of the original tiles, must first use cement mortar leveling the ground, and then do waterproof treatment. Seams should be painted in place, because the bathroom wall and the joint between the ground and the upper and lower water pipe and the joint of the ground is easiest to seep;
Waterproof experiment must be done seriously. After the construction of the toilet all the water stopped, at the door of a road about 20 cm high wall, then pour about 2cm high water in the bathroom, in 24 hours after the check around the walls and ground leakage. Waterproof experiment is the key to ensure the quality of waterproof engineering in toilet.
Wall treatment should be done about 30 cm high waterproof coating, in order to prevent water seepage wall. But if the bathroom wall is non load-bearing light body wall, it is necessary to paint the entire wall waterproof coating. If there is a shower room in the bathroom, the two walls should be painted with each other; if it is a bathtub, the wall waterproof coating adjacent to the bath should be higher than the upper part of the bathtub;
Bathroom wall waterproof materials: ordinary residential bathrooms, places narrow, and pipelines, floors and so on, so often waterproof paint. There are 2 common types: waterproof coating, polyurethane waterproof coating synthetic polymer (the rotation with polyester cloth, glass fiber cloth, etc.); polymer modified asphalt waterproof coating of ---SBS class (with the carcass reinforcing material of polyester cloth, glass fiber cloth, etc.)
