Just bought the ice machine, normal work, but not ice, what is the matter?
Five, ice machine leakage1, the inlet valve is too large to supply water. 2 、 the connection pipe is broken. 3, fault. 4, water level float valve fault.Six, excessive noise1. Fan fault of ice maker. 2, reducer fault. 3 、 compressor noise.Seven, water shortage alarm1 、 water supply joint strainer plug. 2, water pipe plug. 3 、 inlet valve block. 4 、 drain valve leaking. 5 、 water pump failure.Eight, boot system failure1. Phase sequence problem. 2, the power supply system failure. 3 、 control panel fault
Three, wet Bing Bing film is not hard1, environmental temperature is too high, especially in the summer will have a kind of situation. The machine repaired 2, add refrigerant. 3, ice separator water supply is too large. 4, press power shortage.Four. The machine runs without ice1, the water is insufficient or no water. 2, reducer failure or deceleration motor. 3 、 system failure, ice jam, dirty block, etc.. 4, ice machine leakage of snow, the pressure is not enough. 5, ice thickness is not enough.
Causes and troubleshooting of ice making machine without iceCompressor intermittent work1, voltage is too low. Check the power supply. 2 、 handing over contact is not good. 3, system pressure protection. 4 compressor starter fault. 5, condenser is dirty, high voltage protection.Two, reduce the amount of ice production1, capillary or expansion valve plug. 2, the system moisture is too high, there is a slight ice jam. 3, ice machine condensation system is blocked. 4 lack of refrigerant or leakage. 5 、 the evaporator is dirty.
