Iphone charger plug can be pulled out inside similar to what is the use of two-hole socket? More
Charger is split state, unplug the plug, where you can insert a power extension cable, by the extension cord and then connected to the AC power outlet. The benefits of doing so, one is to extend the length of the charging line, first, for the inconvenient direct plug-in electrical outlet provides other solutions.
It is best to use stainless steel, is the price is expensive, followed by the worst is the use of galvanized paint, paint is the metal plate cleaning, phosphating, then paint, roast high temperature, paint on the salt spray have some effect, but Resistant to organic solvents; electro-galvanized is the metal plate after cleaning, galvanized, and then go out to do plating passivation, electro-galvanized alkaline and acid galvanized, electro-galvanized passivation after the sub-environmental protection and non-environmental passivation, blunt The color of the color, blue and white, color, black and other colors of zinc. Galvanized sheet and paint board, will be corroded and dropped, the environment has a great impact, ha ha, the specific choice, or by your own to choose it!
First of all from the construction point of view, high-voltage cable laying the upper layer easier. Operation in the upper layer to facilitate maintenance inspection, and the upper and the ground span is greater, such as the ditch water is not easy to soak in the water (outdoor cable trench most of the water), not because of the water surface failure and maintenance personnel Safety. At the same time in the event of failure, high-voltage cable energy, such as in the bottom will make the top of the cable completely damaged, that is, the role of the use of isolation plate is not large, but at the top plus the isolation board will minimize losses.
Moderate configuration on the election AMD760KF2A75 motherboard gt6301GD5 graphics memory 4G If you want to effect on the GTX650 graphics card
