Larson steel sheet pile and what is the difference between the hot cold
Another difference in actual use is that the number of cold-formed steel pile below 10mm is generally not more than 3 projects, and the number of times used is about 10 times. The number of hot rolled steel sheet piles can reach 30-60 times.Therefore, the choice of cold-formed steel sheet pile or hot rolled steel sheet pile, different projects should be based on its use cycle, the number of turns, water requirements and other comprehensive situation.
Therefore, the same technical parameters, usually hot-rolled, will be slightly lighter proportion.For example, 14mm cold bend and 15.5mm SP-IV steel sheet pile, if they are 400mm width, cold-formed steel sheet pile will be heavier than hot rolled steel pileCold-formed steel sheet pile has 8-10mm thickness, although the product is light weight, but the technical parameters are correspondingly reduced.
The difference between cold bending and hot rolling is different from the name of the manufacturing process.Therefore, the wall thickness of cold-formed steel sheet piles is the same, and the wall thickness of hot rolled steel is different from different parts, and the nozzle can be made thick.
