Light brick walls when the binder should be how to apply
I wonder if you've ever seen a master build a red brick wall? Professional is to use mud scraping plate brick, the whole surface of cement paste, and then to the red brick built body on a pressure plate, a mud slurry pressure to knock two times liquid, the master easily scraped back to cement paste liquid, the red brick wall safe, orderly and beautiful...... The above principles are the same.
No watering before construction. The amount of binder per cubic meter is about 30kg (see instruction)1. mix the water with the binder 1:4 (see instruction manual) and stir it into a sticky paste with an electric mixer.2. scrape the slurry onto the material to be built with a toothed liner or a special tool;3. place the block in the required place and press it properly or tightly, and discharge it neatly.4. it is advisable to mix the pulp well within 3 hours.
The bonding agent of lightweight bricks is mainly made of macromolecule polymer and hydraulic silicate material, mainly white and grey two.
