Home > categories > Construction & Real Estate > Ceiling Profile > Light steel keel ceiling material calculation method?
Question:

Light steel keel ceiling material calculation method?

Light steel keel ceiling material calculation method?

Answer:

Light steel keel ceiling material ratio does not have a standard number, generally according to the shape of the room, height related. If the height of the room does not exceed 4 meters, it is usually: The main keel 1.2 meters, vice keel 4 meters (300MM open file), 1 meter boom, gypsum board 1.05 square (five percent loss). Accessories too much here to do not introduce. The above calculation method is limited to flat top, if the shape plus 20% -30%
Plate in square meters, gypsum board for 3 m * 1.2 m / per, ceiling area divided by the area of each gypsum board is the number of gypsum board used, the appropriate put some loss. The main keel per square meter with one meter can be calculated, pay keel per square meter with 3 meters, the boom calculated by two per square meter, the length of the floor height in accordance with the height of the ceiling can be reduced. Suspension fixed parts according to the number of boom configuration, hanging pieces of each square meter 2 calculation, with the number of boom. Hanging by 3-4 per square meter can be. The total number multiplied by the total area can be summed up, plus wealth can be
Sheet 300 * 300 = 0.09 / square each 300 * 600 = 0.18 / square each 300 * 250 = 0.075 / square each corners of the per square 2.5 ~ 3 m main keel per square 1.1 ~ 1.3 m reprovision 4 main Hanging sub-keel 3.2 to 3.4 meters per square reprovision three sub-hanging hanging screw 10 square with 3 with a 3-meter screw with 4 expansion head General screw according to the height of the space to set

Share to: