Light steel keel partition keel connection fixation

Answer:

Installation of horizontal card keel: According to the design requirements, wall height greater than 3m should be added to the horizontal card file keel, mining to the heart of the rivets or bolts fixed.

Install the keel: the vertical position of the installation of vertical keel, vertical keel inserted at both ends of the top and bottom along the keel and along the keel, adjust the vertical and positioning accuracy, with a suction rivets fixed; wall, column edge keel with nails or wood screws and walls , The column is fixed, the pitch is 1000mm.

Vertical keel sub-file: According to the location of the wall outlet door, in the installation of the top keel, according to the specifications of the cover panel 900mm or 1200mm wide, sub-file size 450mm, less modulus of the file should avoid the door box Side of the first cover panel position, so that broken edge gypsum cover panel is not at the door frame.

Install along the top keel and the keel: according to the location of the partition has been put, according to the line to install the top keel and the keel, with a nail fixed to the main body, the shot nail distance of 600mm.

1. Release line: According to the design and construction plans, in the already done on the ground or pillow belt, release the wall position line, door and window openings border line, and put the top keel position edge. 2. Install the door hole box: put the line after the design, the first wall of the door opening box installed.