Light wall vertical keel spacing is how much
Mainly depends on the thickness of the surface layer of gypsum board, the current market commonly used in the block gypsum board (Knaufort, Jieke, etc.) thickness of 0.95 or so, it is clear that the vertical keel spacing of the gypsum board grid wall strength Play a decisive role, of course, 400MM did not exceed the limits of national standards.
① should be fixed according to the location of the ball along the edge, along the top keel and border keel, keel edge should be coincident with the elastic line. The end of the keel should be installed firmly, the keel and the base of the fixed point spacing should not be greater than 1m.
???? ② installation of vertical keel should be vertical, keel spacing should meet the design requirements. Wet room and steel plaster wall, keel spacing should not be greater than 400mm.
???? ③ installation support keel, the support card should be installed in the direction of the vertical keel opening, the card should be from 400 ~ 600mm, from the keel at both ends of the distance should be 20 ~ 25mm. String 6
???? ④ installation through the series keel, less than 3m partition installed, 3 ~ 5m partition installed two.
???? ⑤ decorative panel transverse seams are not along the ground, along the top keel, the cross should be added keel fixed.
???? ⑥ doors and windows or special joints to install additional keel should meet the design requirements.
Under normal circumstances the main keel spacing 1200mm, vice keel spacing 40cm.
