Line cutting secondary cutting step polishing what is behind
In the case of non-overload, the speed of the motor, the stop position depends only on the frequency and the number of pulses of the pulse signal, and is not affected by the load change. When the stepping driver receives a pulse signal, it drives the stepper motor
Can control the number of pulses to control the angular displacement, so as to achieve the purpose of accurate positioning; at the same time by controlling the pulse frequency to control the motor speed and acceleration, so as to achieve the purpose of speed.
Set the direction of rotation of a fixed angle, known as the "step angle", its rotation is a fixed angle step by step to run.
2, stepper motor is the electrical pulse signal into angular displacement or line displacement of the open-loop control element stepper motor parts.
1, there is a different color then connected 24V, the remaining three colors of the same casually, if the motor reversal put the same three colors of the line on the two for the two.
