Liquid filter bag should pay attention to those matters during installation
3 release pressure and make sure the nozzle is safe for safety. Open the exhaust valve and gradually reduce the pressure of the filter (for the user who has changed the used filter bag).4 open the lid to make sure the filter cylinder pressure is zero and open the lid. Take out the used filter bag. (for the user who has changed the filter bag).5 make sure the filter edges are cleaned up.6, check the edge of arc and the basket. With the upper edge of contact with the cartridge surface must be smooth. If there is no basket basket or installation errors will lead to filter fault.
1, take out new filter bags, new filter bags sealed carton, unused bags must be re packed into plastic bags to prevent dust pollution.2. Turn off the power, stop the pump, turn off the inlet and outlet valves (for the user who has used the filter bag).
7, install the new filter bag, filter bag must be inserted into the basket, the filter bag sealing ring must be right to sit in the sealing groove.8. Test the gasket and choose the gasket that is compatible with the fluid. Close the lid, in particular, when the filter lid is closed, to ensure that the gasket is not twisted or from the groove, screw clockwise ring nut.9. Turn off the exhaust valve and turn on the pump switch. Open the inlet valve and slowly open the valve to see if it leaks. When the leak occurs, turn off the inlet valve immediately and start the outlet valve from the start again.Qi Qi reminded: this operation is best operated or directed by professionals.
