Maintenance essentials of 300 kW generator rental system for recycled plastics machines
Maintenance method: 1, plastic crushing machine should be installed ventilation position, to ensure that the work of heat distribution, and extend its life. 2, should be regularly filled with lubricating oil bearings, to ensure the lubrication between bearings. 3, regular inspection tool screw, new recycled plastic crusher after 1 hours of use, with the fastening tool knife, knife set screws, strengthen fixed blade and tool.
5, time of tool change, the gap between the knife and the fixed knife: above 20HP crusher crusher 0.5MM 0.8MM is better, better than 20HP. The thinner the recovery material, the gap can be properly adjusted. 6, second times before the start, should first remove the machine room remaining debris, to reduce the starting resistance. The inertia cover and the belt wheel cover shall be regularly opened to remove the ash discharge at the bottom of the flange plate, and the powder discharged from the plastic crusher chamber enters the shaft bearing. 7. The machine should be kept in good condition. 8, regular inspection of plastic crusher belt is loose, timely adjustment.
The recycled plastic crusher is the ideal plastic machinery and equipment for recycling and processing of waste plastics. The correct maintenance and maintenance is the best way to prolong the mechanical life
