Method for dismounting and installing ultrasonic vibration sieve transducer
In high precision, high mesh screening and screening, to overcome the narrow particle size range, can be single and multilayer application, full screen self-cleaning effect: more than 500 mesh sieve mesh, non infarct screening efficiency decline spine real processing strong adsorption, gathering, high static, high density and high density light, the proportion of screening setbacks, ensuring food material characteristics unchanged, the accuracy of screening can be raised 1m70% yield raised 0.5-10 times.
How should I install it?Chasing the answerThe installation of ultrasonic transducers, we can install the transducer after doing the above work. The specific steps are respectively coated with glue to paste the transducer and the screen frame contact surface, smear should not exceed 10 minutes, in order to avoid the influence of the glue dry adhesive effect; such as relatively low temperature will cause excessive glue condensation, can be installed in the glue ware 60 degrees warm water to ensure water glue
First of all, the disassembly of the transducer can not be removed by violence, because it is glued, so you can use the art blade carefully cut down. This way, things are ready for the next installation. Because if the demolition of the violence will make the installation surface damage or uneven, for the installation of the next great trouble. When the transducer is removed, the paste shall be cleaned in time. The specific way is to gently scrape down the use of adhesive residue of the knife, and then use an abrasive grinding gently to clean and smooth plane. If conditions permit, use pickling and contact blasting to facilitate installation;
Ultrasonic vibration sieve and material contact parts is also more consumables parts is ultrasonic transducer, so it is very important to master the ultrasonic transducer disassembly method.
