Method for using gasket free sealant
Remove the greasy dirt, moisture, rust and dust on the glued surface, and keep the bonding surface clean and dry;Apply the glue to the surface of the adhesive and coat it into an unbroken rubber ring (which needs glue around the screw hole);The airing glue is about 10 to 15min. After the table is dried, the bolt is fastened and fastened according to the requirement of use;After the glue, should be placed more than 24h, after the glue curing, forming an elastic gasket.
Application method and steps of gasket free sealant:1, remove the sticky surface of oil, dust, keep the bonding surface clean and dry.2. Glue the adhesive onto the surface and coat it into a continuous apron.3, according to conventional bolts can be fastened.4, the rubber coated, do not immediately put into use, to be self cured (more than 24h), the formation of elastic seismic gasket, can play the role of leak proof seal.
Features and uses:Excellent oil resistance, water resistance, weather resistance, excellent sealing performance between 60~260 DEG C, thixotropy, no flow. Can replace the gasket for cars, motorcycles and all kinds of machinery and equipment of engine, gear box, axle flange joints and other parts of the implementation of seal, widely used in various parts of the mechanical seal (gap 6mm).
