Method of shock absorption of inner hole tool
1. Try to increase the cross-sectional area of the Point at the center of the tool holder. 2. The length of the tool rod stretched out in does not affect the processing conditions as short as possible (3) the processing hole is blind hole or a hole is to choose the appropriate blade Angle. According to the material processing and machining allowance to choose the appropriate speed and reasonable feeding.
The main reason is 1. Blade sharpening 2. Cutting quantity 3. Spindle speed 4. Steel 5, parts material 6, the shape of parts Here to tell you a solution to thin wall parts car hole method to avoid shock knife, and find some things of bicycle tube tightly set outside the artifacts, the effect is very good oh, can draw lessons from it
Reducing the speed, reducing the amount of the knife, and the cutting edge of the tool, the Angle, and the knife, slowly accumulate, slowly grasp
The main reason is: The cutting edge of a tool, 2, the amount of cutting, Spindle speed, The steel of the pole, 5, the material of the parts, The shape of the parts. Here tell a solution to thin wall parts car hole method to avoid shock knife, find some things of bicycle tube tightly set outside the artifacts, the effect is very good.
