Milling cutter left, right and right, right cut what is the difference?
Chip removal direction is different.A milling cutter is a rotating tool with one or more cutter teeth for milling (a mechanical process for milling the surface of an object as a cutter). The margin of each in turn cutter tooth intermittently cut work. The milling cutter is mainly used to process the plane, the step, the groove, the forming surface and the cutting workpiece and so on in the milling machine.Turn left and turn right |Left and right refers to the direction of the thread. The cutter blade groove, determines the debris milling cut under the discharge direction. The left and right of the identification and some left and right-hand cutter shape as shown below. Whether it is a thread or a milling cutter, it refers to the right hand without the instruction (default).Turn left and turn right |Turn left and turn right |From the way the thread acts, it can be seen that when the thread is rotated, if it is forced not to be turned in, the nut is inserted into the nut. As opposed to a milling cutter, it is a chip cut during milling. It can be seen that the direction of chip removal of the left and right milling cutters is different when the rotation direction of the milling cutters is constant.In milling, the rotation direction of the left-hand milling cutter must be the same as the right-hand milling cutter to change the direction of chip removal. Therefore, the left-hand milling cutter with the aim of changing the direction of chip removal must also have the same direction as the right-hand milling cutter, i.e., right cut".
The left and right sides of the pump determine the high and low pressure characteristics of the two interfaces of the pump, and the characteristics of the inlet and outlet;(motor positive and reverse)
This means that the milling milling, milling and milling cutter when cutting edge tangent to the surface, if the direction of tangent milling speed and feed speed of the moving direction of the research on the contrary, it is called inverse milling, also is the main said laevorotatory right cutting, milling and milling cutter when cutting edge surface if the tangent, milling speed and the direction of the tangent point in the workpiece speed research in the same direction, they said the right for dextral milling is main said cut.
