Home > categories > Security & Protection > CCTV Lens > Monitor the wall of the lens, not the reason of the image analysis
Question:

Monitor the wall of the lens, not the reason of the image analysis

Monitor the wall of the lens, not the reason of the image analysis

Answer:

1, the network line problem, the unblocked or the line is incorrect.
Four, open the computer to install the corresponding program or turn on the recorder, search and see in equipment management can search to the camera, if you can search to the impassability, can also be trying to identify whether cable lines, that is, the second problem. If the search is up, add, add a connection timeout, see the IP of the VCR (computer IP) and the IP camera of the router in a network segment. For example, most routers have ip192.168.1.1. The IP of the VCR must be 192.168.1. * * star is anything other than 1 (1 -- 255). If the camera and video camera are the same as router IP, they are changed to 192.168.1. * * *. There is no conflict between them. That's it!
If the cable is plugged into the switch, the switch will be switched on or off.
2. Wire problems, this is a good troubleshooting as long as the indicator light on the monitor transformer is on.

Share to: