My home is a solid wood floor, in the time of moving the furniture accidentally knocked off the floor layer of skin, it is difficult to see how to repair?
Cut off the new wood floor on one side of the lower part of the notch and clean the mortise, pay attention to reserve space. The original floor around the tenon coated with glue, and the new wood floor tenon groove are coated with glue, then placed in the gap at the waste plate under the. The first notch of a long edge angle around the floor with the embedding of the original tongue short side edge of the tongue, and then hand press the notch side, and pad block with special tool gently hit. Need to be reminded that the proportion of the new plate before installation and space length is consistent, if the new wood floor is long, can be a bit short, the only other wood floors, causing loss of.
Part of the repair of the destruction of the first need to replace the solid wood floor destroyed, and then completely removed. In practice, using the tool to replace the solid wood floor at the short side cut out a gap, then saw the need to replace the sawn wood floor surface, and then will be divided into small pieces of wood floor removed, but this process to ensure that does not damage the surrounding wood floor. After the removal of the solid wood floor, but also to clean up around the glue, to ensure that the cleaning of the tenon and groove easy to install. If the cleaning is not complete, the seam will be uneven or lax. In the processing of glue, can use a new sliding tenon piece of wood floors in the interface on the back and forth, find out and remove the residual glue, to ensure the restoration of the appearance of solid wood flooring.
Paint the floor general, even reaching the repair effect is no guarantee of environmental standards, therefore, the best customer service staff please paint repair factory door, manufacturers use special repair paint or gel products, which can ensure the repairing effect and environmental protection.
