Home > categories > Construction & Real Estate > Engineered Flooring > My home is warm, has been heating, the composite floor was blisters how to do
Question:

My home is warm, has been heating, the composite floor was blisters how to do

My home is warm, has been heating, the composite floor was blisters how to do

Answer:

To warm if the leak ~ repaired in the shop ~ ~ ~
1. Dry the surface water on the floor in the shortest possible time. 2. If it is a small area of ??soaked in water, it is recommended not to strengthen the floor pry dry, so easy to strengthen the floor caused by hard damage, it may cause irreversible use of serious consequences. It is best to quickly remove the floor of the baseboard, exposing the expansion joints, by the expansion of the water vapor will be distributed, according to the size of different seepage, dry up usually takes about three to ten days. 3. At the same time take the vacuum cleaner in the bubble floor of the splicing gap suction water vapor, or take the dryer with cold air dry, but do not use hot air blowing, to prevent the surface caused by dry and dry deformation caused by dry. 4. If it is a large area soaked in water, should promptly notify the floor after-sales service, and try to keep the floor without deformation of the floor carefully pry up, according to "well" font stacked placed dry, with its stacking The weight to prevent the occurrence of deformation, while attention can not be placed under the sun exposure, it should be placed in the ventilation at the dry, under normal circumstances for better quality solid wood flooring can be used again. 5. It is best to replace the floor which has been drilled with water, and it is not recommended to plan the part of the arched and re-paint. As the arch part will be flattened, the paint will lead to other Coordination, and the uneven thickness of the entire board, the force is different, prone to pits.
How could it be blisters? Is it hot? If it is to warm the water, it is serious, and need to quickly find a professional to repair the replacement; valve Fen Huang Huang Yi No. wrong copper and nitrogen expansion of the floor was blisters, and can pry up the floor, drying sun, dry after no deformation, But also can be used, other deformation, can only be lost; but the proposed replacement, or else the new floor, the old floor, how many will have color, visually not good
Speed to find a teacher to pay off the deal, over time is useless.

Share to: