Before my Juicer are good, I think there is a switch where the problem, because before the press and broken after the press handle is not the same, don't let me go to the repair shop ah, I am in the United States, do not know where, if know, here the manual repair of super expensive things. Come on, can I open it myself? More detail, please
A few suggestions, 1, the product in the warranty period not to disassemble and disassemble, 2, repair, cut off the power supply. 3. Observe the connection of the connecting parts carefully before disassembling. 4. Remember the disassembly order and parts. 5. Prepare suitable tools, such as screwdriver, universal meter, electric iron, etc.. 6, be ready to throw away the psychological, because some parts may not buy.
You do not know the specific circumstances of the juicer, but one thing is certain, if the maintenance cost is very high, some parts of the country the maintenance fee equivalent to half of the new machine, but the machine principle is very simple, is nothing more than a motor, switch, and transmission lines, you can try to self check, first check the external plug, power supply, and the wires are broken, then check the appearance of the machines, to see if there are strong screws and plate joints, use tools disassembled, remember disassembly sequence, the disassembled parts neatly, external after removal of internal components can be observed, with a twist of the hand, see if there is a jam, transmission parts are damaged, with a multimeter measuring circuit, switch to find out whether there is damage, replacement parts.
You must first understand the internal structure of the juice, in order to remove the motor estimation problem is not too large, is the main power supply line and switch to remove the check, there may be due to the use of the instantaneous overheat causing line power switch fault, according to the original order installed after test. Pay attention to safety when removing.
Disconnect the machine, 2. power cord directly connected to the positive and negative lines, and then connect the plug 3.When the plug is inserted into the socket. It's simple and convenient. It doesn't cost 1 centsAnd wish you and your family a happy spring festival!!!
