NC machining, the speed and feed of the reamer
There is no accurate data, only experience,,Question is not very professional, do not know how much,With the material, but also with clamping rigidity, tool rigidity, tool size, margin, the requirements of the accuracy of the drawings and so onNot a unified answer, in fact, the actual situation depends on the processing of the scene to determine the speed and feed,Adjust at any timeNow let me tell you something about my operation. I do horizontal boring and millingGray iron, milling cutter, assuming 200--300, speed 100--200, the fastest 250 mm depth of 10 mm 1--2 feedDrilling, high-speed steel drill bit, 40 bit, speed 60--150 between 0.4--1 mm, as the size of the drill changes, the speed and feed will also change,End mills and keyway cutters, speed 60--80, feed 0.4--0.8Boring, boring. Assuming the diameter of 100 holes, boring bar 60 thick, length 200, speed 200--300, feed 0.26--0.63 precision boring: margin 0.8--1.2, speed 350--550., feed 0.1--0.17Reamer, cutting allowance 0.1, add oil, feed speed 15--30, 0.6--1.5 mmThe above is my experience, the premise is that you must sharpen the tool,I always feel like a clip on a knife, and I don't always have the tools to sharpen it by hand
There is no accurate data, only experience,,Question is not very professional, do not know how much,With the material, but also with clamping rigidity, tool rigidity, tool size, margin, the requirements of the accuracy of the drawings and so onNot a unified answer, in fact, the actual situation depends on the processing of the scene to determine the speed and feed,Adjust at any timeNow let me tell you something about my operation. I do horizontal boring and millingGray iron, milling cutter, assuming 200--300, speed 100--200, the fastest 250 mm depth of 10 mm 1--2 feedDrilling, high-speed steel drill bit, 40 bit, speed 60--150 between 0.4--1 mm, as the size of the drill changes, the speed and feed will also change,End mills and keyway cutters, speed 60--80, feed 0.4--0.8Boring, boring. Assuming the diameter of 100 holes, boring bar 60 thick, length 200, speed 200--300, feed 0.26--0.63 precision boring: margin 0.8--1.2, speed 350--550., feed 0.1--0.17Reamer, cutting allowance 0.1, add oil, feed speed 15--30, 0.6--1.5 mmThe above is my experience, the premise is that you must sharpen the tool,I always feel like a clip on a knife, and I don't always have the tools to sharpen it by hand
CNC reamer is generally high-speed steel cutting tools, the line speed is generally around 10-20, according to the diameter of your reamer, you can switch on the basis of cutting speed formula. The feed is generally fed to each turn 0.1mm
