Home > categories > Construction & Real Estate > Partitions > Net height of 5.5 meters how to do light steel keel partition
Question:

Net height of 5.5 meters how to do light steel keel partition

Net height of 5.5 meters how to do light steel keel partition

Answer:

Do a good job to do the ceiling and then make small ceilings (if the open space is just 0.6 meters wide). In fact, the cost difference is not far, up to one or two dollars a square meter, mainly to be stable, the office should say how to spend 7-8 years Ceiling keel with the boom (the market has 8% threaded boom to sell) connected to the hanging pieces and then the main keel.
If the width of the wall is too large, in the middle of each wall width, the top of the keel to the top of each side of a long wooden Fang (preferably 5 * 3) to fix the dragon frame does not shake, with screws fixed wall Later, the wall will be more stable.
In each corner of the location must have a keel directly to the top of the indoor space (the rest can only be done than the ceiling - that is, slightly higher than 3 meters is enough), because the keel is generally 3 meters, So to connect the keel to 5.5 meters; can also be used 5 * 3 thick wooden side fixed to the top of the space.

Share to: