New vertical centrifugal oil filter operating instructions
4, raw materials, hair oil cleanliness is not the same, clean diesel can be more than one to two times of Qing dynasty.5, vertical centrifugal oil filter, through the production of the brake device, when the power is broken, the drum rotation can not stop the brakes, the need to adjust the brake lever slow brake, otherwise the oil reversal is not clear.6, clean up the oil when the first outer barrel cover three bolts remove out, provided on the cover, the inner barrel cover three bolts remove out, open cover, shovel bucket wall oil.7, with a period of time, the center of the barrel, oil, nylon plate, bolt unloading, and then carry the inner barrel mouth upward pull, after the inner barrel put forward, clean the bottom of the barrel overflow overflow slag, and then on the inner barrel.
Vertical centrifugal oil filter method of use, can be found on the Internet a lot, of course, can only find the most needed is the best.Instructions for the use of centrifugal oil filters:1, close the power supply, when the motor is running properly, pour the oil into the oil spill bucket, and then run for 30 seconds, the power off, the drum stopped spinning, pure oil automatically flow out from the pipe.
Oil filter instructions can go online to check ah, Xinxiang Younaite website, can go to see it, should be able to find the information you need.