Home > categories > Electrical Equipment & Supplies > Inverters & Converters > Notebook plug in the power adapter lights, but can not open the machine
Question:

Notebook plug in the power adapter lights, but can not open the machine

Notebook plug in the power adapter lights, but can not open the machine

Answer:

Put the board under the re-installed, try and then boot. Asked: This is the case of removal, with the battery can boot answer: Then put the battery on the computer, and then use the power splitter to see if you can. If not I do not know, is the computer question to ask: This can be
1. Remove the power adapter and battery, the host does not power the case, hold down the boot button does not move, keep the notebook 30 seconds to release the residual static electricity; 2. Connect the power adapter separately to try to power on; 3. Connect the battery separately to try to boot; 4. If conditions permit, you can plug the memory test.
This is a contradictory problem: First, the power adapter lights because the power is good, but does not mean that the computer is good; Second, can not open the machine with the power adapter is lit, it is your computer reasons. Recommendation: Check the computer hardware. Asked: But the battery can be used to start ah answer: Remove the battery plug in the adapter or put the battery installed plug in the adapter, if you can not open the machine, then it is a hardware conflict. The solution to the hardware conflict is that you try another adapter. Asked: the battery removed to die, but as long as there is a battery can answer: it shows that your adapter is bad. Asked: the more magical is plug in the adapter and the battery, the battery will not consume Answer: get you electronic city so that they give you a test. You can say to buy an adapter, and then try, you can use the words to buy, can not use the words and then think of other methods.

Share to: