Home > categories > Machinery & Equipment > Concrete Mixers > Operation procedure of concrete mixer
Question:

Operation procedure of concrete mixer

Operation procedure of concrete mixer

Answer:

Beverage has certain viscosity, in the process of the mixer beat in drinks will be integrated into the part of the gas, gas reaches a certain amount to rise, are viscosity material liquid package, will form the bubbles. It's just mixing Typing is not easy, such as satisfaction, hope to adopt.
Before stirring, the car should be run in an empty car. Adjust the timing of the relay according to the stirring time. Water moistening the mixing bowl and the blade and the ground. The process, such as electrical or mechanical fault, should be discharged from the part of the mixing material, lighten the load, remove the fault and then drive again. When operating, the operation should be checked regularly to prevent safety accidents such as electrocution and mechanical injury. Finish the experiment, turn off the power supply, clean the mixing drum and the ground and clean up the cleaning.
Safety procedure of concrete mixer A blender must be placed in a solid place, secured with a bracket or a leg holder, and no tires should be replaced. Before starting the mixer, the clutch, brake, wire rope and so on should be checked, and no foreign material in the roller. When the hopper is hoisted, no one shall pass or stay in the hopper, and the hopper shall be fixed after the work is completed. When running, it is strictly forbidden to put the tool into the roller. It is strictly forbidden to leave the work station without any evidence of operation or operation. When repairing, should fix the hopper, cut off the power supply. After the work is finished, should clean the fuselage concrete, do the lubrication to maintain, cut off the power to lock the door.

Share to: