OPPLE kitchen ceiling lamp 10cm x 10cm. How to disassemble and replace the broken tube?
Pay attention to choosing lamps:1, from the security point of view, in the installation of kitchen lights, the placement should be as far away from the stove as possible, do not let the gas, water vapor directly infected, smoke exhauster or exhaust fan can solve this problem. The kitchen needs safe and convenient lamps and lanterns. The lamp holder is easy to be polluted by oil and sulfur dioxide, so it is not suitable to use the lamp holder switch. The lamp holder is best bayonet mounted. It is easier to remove than a screw bulb after slight rusting.2, from the brightness, because it involves a lot of cooking in the process of complicated work, so the kitchen lamp should choose 21 points, because of insufficient light and to avoid unnecessary risk, in addition, higher brightness to the eyes can also play a good protective effect. So, can be used in general lighting and local lighting combination in design, with large power ceiling lamps to ensure overall brightness, and then in accordance with the kitchen furniture and kitchen layout, selection of local lighting use of lamp and take care of working face, height adjustable lighting chandelier, and install lampblack machine take off work lights, conditional, lockers can be installed in the cabinet lights, to make the work surface, the kitchen operations involved in the preparation of the dining table, washing table, corner have enough light.3, because the kitchen fuel combustion will produce sulfur dioxide and other acidic gases, metal products have a very serious corrosion. In addition, the kitchen often has water vapor, water vapor and sulfur dioxide role, the lamp corrosion is very strong. Therefore, in the choice of kitchen lamps, should pay attention to their service life, and pay attention to regular cleaning. Thereby prolonging its service life. In the style, the current market is not suitable for kitchen lamps are not many, so you can choose boldly. The overall style is concise and practical.
Oct 25, 2017
Method 1: will be installed in the kitchen light plate to push upwards, if you can not push, find a blade, in the installation of lights around the clapboard rotation, touch something, move left and right, and then push up again
Oct 25, 2017
Method 2: if the lampshade is convex, the protruding part can be grabbed by both hands. The inner side is extruded first. If there is no reaction to the other direction, the lampshade can be removed when the pin in the lampshade is pulled out of the lamp plate.
Oct 25, 2017